Showing all 9 results
MS6016 – Process indicator with rooting capability
85,00€ – 115,00€Price range: 85,00€ through 115,00€ VAT_not included
Input signal rooting capability
Universal input – on request
Measurement accuracy for current and voltage input – 0.015% of the range
Galvanic isolated analog output – user-adjustable
Programmable discrete outputs – 4 pieces
Programmable digital filter on input, output and display
Universal power supply
Isolated RS485 interface – MODBUS RTU
MS6026 - Process indicator with three-color bargraph and universal input
90,00€ – 115,00€Price range: 90,00€ through 115,00€ VAT_not included
High measurement accuracy – 0.01%.
Temperature stability – drift < 10 ppm/°C
Universal input with 31 types of sensors
Universal power supply 90 ÷ 250 VAC
Three-color bargraph – 7 zones that the user freely configures as levels and color – green, red or orange.
5 discrete outputs that are
MS8111 - two-channel controller with alarm and timer and two analog outputs
85,00€ – 115,00€Price range: 85,00€ through 115,00€ VAT_not included
Two controllers and a multifunctional timer in one device
Simultaneous control of two technological variables
Programmable control - On/Off and P, independent for both channels
Two analog outputs, transmitter input variables
Third output for timer or alarm - user selectable
Simplified operation
MS8130 NTC - PID Controller with analog output and NTC sensor
60,00€ – 80,00€Price range: 60,00€ through 80,00€ VAT_not included
Small overall dimensions 76x35x62
PID or ON/OFF control modes
Analog control or transmitter output
Complete with NTC sensor with 1,5 meters cable
Measurement and regulation range -40 ÷ 125 °C
MS8346 - Weight controller with analog output and MODBUS RTU communication
145,00€ – 195,00€Price range: 145,00€ through 195,00€ VAT_not included
High measurement accuracy 0.003%
User selectable measurement speed up to 80 SPS
Galvanic isolation of the measuring part from the analog output, discrete inputs and outputs and from RS485
Quick selection of up to 4 sets of parameters by combining two digital inputs
Automatic counter of finished doses
Analog output
MS8347 - Weight controller with analog output and MODBUS RTU communication
145,00€ – 195,00€Price range: 145,00€ through 195,00€ VAT_not included
High measurement accuracy 0.003%
Additional maximum value mode - suitable for strength tests
User-selectable measurement speed up to 80 SPS
Galvanic isolation of the measuring part from the analog output, discrete inputs and outputs and from RS485
Quick selection of up to 4 sets of parameters by combining two digital
MS9014_D - temperature transmitter
43,00€ – 46,00€Price range: 43,00€ through 46,00€ VAT_not included
Input - on request:
- RTD (Pt100 : EN 60751)
- TC-J (Fe-CuNi : EN 60584)
- TC-K (NiCr-Ni : EN 60584)
Input range:
- for Pt100 : -50...400°С
- for TC-J : 0...600°С
- for TC-K : 0...1200°С
Output range, °С - on request
Output line - on request:
- 2-wire 4...20 mA DC
- 3-wire 0...10
MS9014_H - temperature transmitter
32,00€ – 34,00€Price range: 32,00€ through 34,00€ VAT_not included
Input - on request:
- RTD (Pt100 : EN 60751)
- TC-J (Fe-CuNi : EN 60584)
- TC-K (NiCr-Ni : EN 60584)
Input range:
- for Pt100 : -50...400°С
- for TC-J : 0...600°С
- for TC-K : 0...1200°С
Output range,°С - on request
Output line - on request:
- 2-wire 4...20 mA DC
- 3-wire 0...10 V DC
MS9045 - humidity and temperature transmitter
75,00€ – 130,00€Price range: 75,00€ through 130,00€ VAT_not included
High accuracy and fast response
Wide temperature ranges (from -40 to 70,125 or 140)°C
Fast recovery after water condensation
In a compact housing with options for wall mounting or with a remote sensor
MODBUS RTU serial communication via isolated RS485 – option
Four programmable discrete outputs – option
Programmable combinations