MS8347 – Precision weighing controller with analog output and MODBUS RTU communication

142,80198,90 VAT_not included

  • High measurement accuracy 0.003%
  • Additional maximum value mode – suitable for strength tests
  • User-selectable measurement speed up to 80 SPS
  • Galvanic isolation of the measuring part from the analog output, discrete inputs and outputs and from RS485
  • Quick selection of up to 4 sets of parameters by combining two digital inputs
  • Automatic dose counter
  • Analog output retransmitting the measured input value up to 0.003% linearity
  • MODBUS RTU communication via galvanically isolated RS485
Clear
Qty
Сравни
SKU:N/A

In Stock

MS8347 v2.3_2020-04-07 BG
MS8347 v2.3_2020-04-14 EN

 

MS8347 is suitable for application in systems for dosing or mixing products by weight method. The input signal is from a bridge strain gauge sensor, which is powered by the device. The sensitivity and supply voltage of the sensor are hardware fixed and are set in the Order Code.

The analog output signal, which is galvanically isolated from the input signal, transmits the measured input value. The most commonly used unified format is 0 ÷ 20 mA DC; 4 ÷ 20 mA DC; 0 ÷ 10 V DC, which is also specified in the Order Code.

The controller has four galvanically isolated from the measuring part discrete inputs: TARE, ZERO, S1 and S2, for taring and zeroing the measurement, respectively, as well as for selecting preset control set points.

The controller has three discrete outputs, which are user configurable.

Analog Output

Without Analog Output, 0… 20 mADC, 0…10 VDC, 4… 20 mADC

Communication

,

Reviews

There are no reviews yet.

Be the first to review “MS8347 – Precision weighing controller with analog output and MODBUS RTU communication”

Your email address will not be published. Required fields are marked *

Back to Top