Showing 1–54 of 58 results
DL 3.02 - Софтуер за архив на процеси - до 988 величини
180,00€ VAT_not included
Софтуера работи с WINDOWS 11, 10, 7 или XP
Възможност за изчисляване на F-ефект и издаване на протокол в приложения на стерилизация.
Комуникация с до 247 устройства - тип DL12A и/или DL12CNT.
Програмируем период на архивиране – от 1 до 32000 s.
Комуникация с протокол MODBUS RTU.
Вграден часовник
LT Con - level and temperature controller
40,00€ – 55,00€ VAT_not included
Three operating modes – temperature controller, temperature and level controller, level controller
User-programmable operating mode – filling/emptying
Built-in self-adjustment of sensitivity, depending on the conductivity of the liquid
Time delay when switching on
Option for emergency shutdown of the heater in the absence of liquid
MS12A - 4 channel data logger with MODBUS RTU communication
120,00€ VAT_not included
MODBUS RTU communication
Simultaneous logging of up to 4 variables
RTC - real time clock
Non-volatile memory
Three logging modes:
- continuous
- START/STOP by threshold values
- START/STOP by level from external switch
Date logging of any process for which a transmitter with analog output is applicable
MS12CNT - data logger for flow with MODBUS RTU communication
120,00€ VAT_not included
MODBUS RTU communication
Discrete input for flow logging from meter
Additional two analog inputs
RTC - real time clock
Non-volatile memory
Three logging modes:
- continuous
- START/STOP by threshold values
- START/STOP by level from external switch
MS2000pH § S150CD - professional pH meter with pH electrode
164,00€ VAT_not included
Professional grade pH system
High accuracy
Automatic calibration
Automatic temperature correction
Easy operation
Small size
Automatic battery control
Programmable automatic shutdown
MS2000pH § S450CD - professional pH meter with pH electrode
175,00€ VAT_not included
Professional grade pH system
Electrode with flat measuring surface
The right choice for the food industry
The right solution for gels and emulsions
High accuracy
Automatic calibration
Automatic temperature correction
Easy operation
Small size
Automatic battery control
Programmable automatic shutdown
MS2000RH - Handheld Humidity Meter
140,00€ VAT_not included
High accuracy - better than 2% rh
Easy operation
Small size
Automatic battery control
Programmable automatic shutdown
Simultaneous measurement of relative humidity and air temperature
MS2012R - Professional thermometer from minus 200 °C to 850 °C
94,00€ – 98,00€ VAT_not included
Device range: minus 200 °C to 850 °C
Accuracy: 0.03 °C in the range -200 °C to 600 °C
Device stability: 10 ppm/°C
Resolution: 0.01 °C or 0.1 °C
Automatic battery control
Programmable automatic shutdown
Measurement accuracy and range are limited by the accuracy and range of the probe
MS2022 – Digital thermometer
95,00€ VAT_not included
User-adjustable range and display format
Suitable for calibration by calibration laboratories
Built-in system parameters
Long battery life
Easy to use
MS6016 – Process indicator with rooting capability
85,00€ – 115,00€ VAT_not included
Input signal rooting capability
Universal input – on request
Measurement accuracy for current and voltage input – 0.015% of the range
Galvanic isolated analog output – user-adjustable
Programmable discrete outputs – 4 pieces
Programmable digital filter on input, output and display
Universal power supply
Isolated RS485 interface – MODBUS RTU
MS6026 - Process indicator with three-color bargraph and universal input
90,00€ – 115,00€ VAT_not included
High measurement accuracy – 0.01%.
Temperature stability – drift < 10 ppm/°C
Universal input with 31 types of sensors
Universal power supply 90 ÷ 250 VAC
Three-color bargraph – 7 zones that the user freely configures as levels and color – green, red or orange.
5 discrete outputs that are
MS7003 signal calibrator
High accuracy
Select a measured or simulated process parameters
Menu convenient for work
Small size
The MICROSIST Multifunctional Portable Calibrator MS7003 is designed for measuring and simulating different process quantities, checking and setting up laboratory and industrial control and measurement instruments in or outside laboratory rooms. Measures and simulates: mV,
MS8111 - two-channel controller with alarm and timer and two analog outputs
85,00€ – 115,00€ VAT_not included
Two controllers and a multifunctional timer in one device
Simultaneous control of two technological variables
Programmable control - On/Off and P, independent for both channels
Two analog outputs, transmitter input variables
Third output for timer or alarm - user selectable
Simplified operation
MS8112 - two-channel controller with alarm and timer
80,00€ – 85,00€ VAT_not included
Two controllers and a multifunctional timer in one housing
Simultaneous control of two technological variables
Programmable control - On/Off and P, independent for both channels
Digital input for Selection of two sets points
Third output for timer or alarm - user selectable
Simplified operation
MS8126 - PID контролер с универсален вход и MODBUS RTU
90,00€ – 125,00€ VAT_not included
>> от серията Pro Class 0,01%
Универсален вход - потребителски избираем
Точност на измерване - 0.01% от обхвата за линеен вход
Два галванично изолирани аналогови изходи - препредаващи или управляващи - потребителски избираеми и настройваеми
Потребителски избираем закон за управление PID или трипозиционен ON/OFF
Функция самонастройка на параметрите
Автоматичен и
MS8130 NTC - PID Controller with analog output and NTC sensor
60,00€ – 80,00€ VAT_not included
Small overall dimensions 76x35x62
PID or ON/OFF control modes
Analog control or transmitter output
Complete with NTC sensor with 1,5 meters cable
Measurement and regulation range -40 ÷ 125 °C
MS8131 NTC - Temperature controller complete with NTC probe
40,00€ VAT_not included
Low price
Small overall dimensions 76x35x62
ON/OFF or P control
Complete with NTC sensor with 2 meters cable
Measurement and regulation range -40 ÷ 120°C
MS8132 - Controller for controlling cold rooms with two NTC probes
45,00€ VAT_not included
Compressor, fan and defrost control
Complete with 2 NTC sensors with 2 meters of cables
Small dimensions 76x35x62 mm
Simplified operation
MS8220 - Dispenser flowmeter with counter input and MODBUS RTU communication
75,00€ – 110,00€ VAT_not included
USER PROGRAMMING OF THE STATUS, SETTINGS AND CONFIGURATION OF OUTPUTS
REVERSE COUNTER FOR CURRENT ADJUSTMENT OF THE ACCUMULATING VALUE
WIDE INDUSTRIAL AND TRADE APPLICATION WITH COUNTING FUNCTIONS, ACCUMULATION OF VALUE OR DOSAGE
ЗАПЕМЕТЯВАНЕ НА ПОКАЗАНИЯТА ПРИ ОТПАДАНЕ НА ЗАХРАНВАНЕТО
GALVANIC INSULATED INPUTS AND OUTPUTS
MODBUS COMMUNICATION AND BASIC PROGRAMMING
MS8346 - Weight controller with analog output and MODBUS RTU communication
145,00€ – 195,00€ VAT_not included
High measurement accuracy 0.003%
User selectable measurement speed up to 80 SPS
Galvanic isolation of the measuring part from the analog output, discrete inputs and outputs and from RS485
Quick selection of up to 4 sets of parameters by combining two digital inputs
Automatic counter of finished doses
Analog output
MS9014_D - temperature transmitter
43,00€ – 46,00€ VAT_not included
Input - on request:
- RTD (Pt100 : EN 60751)
- TC-J (Fe-CuNi : EN 60584)
- TC-K (NiCr-Ni : EN 60584)
Input range:
- for Pt100 : -50...400°С
- for TC-J : 0...600°С
- for TC-K : 0...1200°С
Output range, °С - on request
Output line - on request:
- 2-wire 4...20 mA DC
- 3-wire 0...10
MS9014_H - temperature transmitter
32,00€ – 34,00€ VAT_not included
Input - on request:
- RTD (Pt100 : EN 60751)
- TC-J (Fe-CuNi : EN 60584)
- TC-K (NiCr-Ni : EN 60584)
Input range:
- for Pt100 : -50...400°С
- for TC-J : 0...600°С
- for TC-K : 0...1200°С
Output range,°С - on request
Output line - on request:
- 2-wire 4...20 mA DC
- 3-wire 0...10 V DC
MS9015 – level probe with analog output and stainless steel head
160,00€ – 170,00€ VAT_not included
Application: for conductive or weakly conductive liquids in metal vessels
for clean or contaminated water,
for food or chemical liquids, compatible with PTFE
with AISI 316/EN 1.4401_IP68 – stainless steel head
Operating temperature, deg C- 20 ... 200
Probe length: optional
MS9015-Level probe with analog output and plastic head
142,00€ – 155,00€ VAT_not included
Приложение: за проводими или слабо проводими течности в метални съдове
за чиста или замърсена вода,
за хранителни или химически течности, съвместими с PTFE
с KPP_IP68 – пластмасова глава за хранителни и химически приложения
Работна температура, deg C- 20 ... 200
Probe length: optional
MS9024 - MODBUS RTU programmable transmitter with universal input
Universal input with built-in linearization for 11 resistance temperature detectors and 10 thermocouples, as well as 3 user-adjustable sensors
Four-, three- or two-wire circuit for connecting the resistance temperature detectors
Automatic temperature correction of the cold end of all thermocouples
Isolation of the input from the output signal
MS9033 - Isolated pH/ORP Transmitter
122,00€ VAT_not included
Range and accuracy:
pH: -2.00 ÷ 16.00 / 0.01
°C: 0.0 ÷ 100.0 / 0.1
mV: - 2000 ÷ 2000 / ± 0.5
Three-wire connection
Galvanically isolated input
Battery power supply / option/
Automatic calibration
Automatic temperature correction of calibration buffers
Protection degree: IP65.
MS9034 - USB/UART programmable transmitter with universal input
56,00€ – 66,00€ VAT_not included
For head or rail mounting (optional)
Professional grade accuracy - up to 0.015%
Ultra temperature stability - 0.002% / °C
Universal input with built-in linearization for 11 RTDs and 10 thermocouples, as well as 3 user-configurable sensors
Four-, three- or two-wire RTD connection scheme
Automatic cold junction temperature correction for
MS9035 – humidity probe
65,00€ – 75,00€ VAT_not included
High accuracy and fast response
Wide temperature range from -25 to 75 °C
Fast recovery after condensation
Analog output
- with one analog current output (4 ... 20) mA for RH%;
- with two voltage outputs in ranges up to 10 VDC for RH% and T°C
MS9044 § MS6201– two-wire transmitter with local indicator
120,00€ – 122,00€ VAT_not included
Temperature transmitter with local indicator
With direct or remote process connection - optional
Thread for process connection - optional
Probe diameter - optional
Probe length - optional
Range according to version - optional
Electrical connection DIN 43650 coupling
Analog output - two-wire 4...20 mA
Suitable for connection with two-wire indicator
MS9045 - humidity and temperature transmitter
75,00€ – 130,00€ VAT_not included
High accuracy and fast response
Wide temperature ranges (from -40 to 70,125 or 140)°C
Fast recovery after water condensation
In a compact housing with options for wall mounting or with a remote sensor
MODBUS RTU serial communication via isolated RS485 – option
Four programmable discrete outputs – option
Programmable combinations
MS9054 - USB/UART programmable triple-isolated transmitter with universal input
98,00€ – 102,00€ VAT_not included
Two modifications (optional)
- MS9054-A – with active output
- MS9054-P – with passive output
Professional class accuracy - up to 0.015%
Ultra temperature stability - 0.002% / °C
Universal input with built-in linearization for 11 thermistors and 10 thermocouples, as well as 3 user-adjustable sensors
Four-, three- or two-wire connection scheme
NTC sensor with PVC or silicon cable
8,50€ – 18,00€ VAT_not included
Sensor: NTC 10K at 25 °С ±1%
Sensitivity R25/85: 3435 ±1%
Accuracy: <1 % of FS
Accuracy: <0.5% for -20...50°С
Temperature range: selectable
Probe diameter: 5 mm
Probe length: 30 mm
Cable length: 2 m
Probe material: DIN1.4301(AISI 304)
Pt100 probe for free mounting with silicone cable - 4 wires
13,00€ – 26,00€ VAT_not included
Sensor: Pt100 EN 60751; class B
Temperature range: -50…400°C
Probe diameter: optional
Probe length: optional
Cable length: optional
Housing material: DIN1.4571(AISI 316 Ti)
Cable type: SLSL or TSL (silicone, max. 220 °C ambient temperature)
Pt100 probe for free mounting with silicone cable – 3 wires
13,00€ – 26,00€ VAT_not included
Sensor: Pt100 EN 60751; class B
Temperature range: -50…400°C
Probe diameter: optional
Probe length: optional
Cable length: optional
Housing material: DIN1.4571(AISI 316 Ti)
Cable type: SLSL or TSL (silicone, max. 220 °C ambient temperature)
Pt100 probe for free mounting with three-wire shielded cable
14,00€ – 28,00€ VAT_not included
Sensor: Pt100 EN 60751; class B
Temperature range: -50…400°C
Probe diameter: optional
Probe length: optional
Cable length: optional
Housing material: DIN1.4571(AISI 316 Ti)
Cable type: GLGLP (glass fiber with metal shielding)
Pt100 probe for free mounting with two-wire shielded cable
13,00€ – 27,00€ VAT_not included
Sensor: Pt100 EN 60751; class B
Temperature range: -50...400°C
Probe diameter: optional
Probe length: optional
Cable length: optional
Housing material: DIN1.4571(AISI 316 Ti)
Cable type: GLGLP (glass fiber with metal shielding)
Pt100 probe with head type "B" with built-in transmitter
57,00€ – 65,00€ VAT_not included
Protective head: type B
Sensor: Pt100 EN 60751; class B
Output signal: 4...20 mA two-wire
Temperature range: optional
Probe diameter: optional
Probe length: optional
Connection, thread: optional
Housing material: DIN1.4301(AISI 304)
Pt100 probe with head type "B" with connection to the head
24,00€ – 31,00€ VAT_not included
Protective head: type B
Sensor: Pt100 EN 60751; class B
Temperature range: optional
Probe diameter: optional
Probe length: optional
Connection, thread: optional
Housing material: DIN1.4301(AISI 304)
Pt100 probe with head type "B" with external thread
27,00€ – 35,00€ VAT_not included
Protective head: type B
Sensor: Pt100 EN 60751; class B
Temperature range: optional
Probe diameter: optional
Probe length: optional
Connection, thread: optional
Housing material: DIN1.4301(AISI 304)
Pt100 probe with head type MA with connection to the head; -50...200°С
21,00€ – 27,00€ VAT_not included
Protective head: MA
Sensor: Pt100 EN 60751; class B
Temperature range: -50…200°C
Probe diameter: optional
Probe length: optional
Connection, thread: optional
Housing material: DIN1.4301(AISI 304)
Pt100 probe with head type MA with external thread; -50...400°С
26,00€ – 33,00€ VAT_not included
Protective head: MA
Sensor: Pt100 EN 60751; class B
Temperature range: -50...400°C
Probe diameter: optional
Probe length: optional
Connection, thread: optional
Housing material: DIN1.4301(AISI 304)
Pt1000 probe for free mounting with silicone cable
15,00€ – 25,00€ VAT_not included
Sensor: Pt1000 EN 60751; class B
Temperature range: -50...200°C
Probe diameter: optional
Probe length: optional
Cable length: optional
Housing material: DIN1.4571(AISI 316 Ti)
Cable type: SLSL or TSL (silicone, max. 220 °C ambient temperature))
SR 03 - Controller for solar systems with three probes Pt1000
80,00€ VAT_not included
Complete with three sensors Pt1000 with 2 m silicone cable
Measurement range and accuracy -20 ÷ 200 ° С / ± 0.5 ° C
Protection in case of danger of freezing of the liquid in the collector
Protection of pipes against overheating
Housing for wall mounting - protected (IP65)
SR 04 – Controller for solar and heating systems
105,00€ – 175,00€ VAT_not included
Control of solar systems with one or two collectors, boiler, accumulator tank and pool
Communication (optional): RS485, MODBUS RTU protocol
Automatic and manual control mode
Anti-blocking function of pumps
Measurement update function
Non-volatile clock
Two-line alphanumeric LCD display
Temperature sensor insert with 20 mm connection
17,00€ – 25,00€ VAT_not included
Probe insert with head type MA
Hole spacing: 20 mm
Sensor: optional
Pt100 EN 60751; class B
J (Fe-CuNi) EN 60584-1; class 2
K (Ni-CrNi) EN 60584-1; class 2
Temperature range:
-50...400 °С for Pt100
-50...400 °С for TC-J
-50...1150°С for TC-K
Probe diameter: optional
Probe length: optional
Body material:
Temperature sensor insert with 33mm connection
18,00€ – 27,00€ VAT_not included
Probe insert with head type B
Hole spacing: 33 mm
Sensor: optional
Pt100 EN 60751; class B
J (Fe-CuNi) EN 60584-1; class 2
K (Ni-CrNi) EN 60584-1; class 2
Temperature range:
-50...400 °С for Pt100
-50...400 °С for TC-J
-50...1150°С for TC-K
Probe diameter: optional
Probe length: optional
Body material:
Thermo hygrometer MS2000RH - Calibrated EN ISO/IEC 17025
220,00€ VAT_not included
MS2000RH&T-Portable digital thermohygrometer
LCD 2x8 alphanumeric display;
range -20.0 °C to 70.0 °C;
range from 0 %rh to 100 %rh;
power supply with 2 x 1.5 V AAA batteries incl. in the set;
measurement accuracy: ±2 %rh; ±0.2 °C;
combined probe MS9035 with 1 m cable;
operating instructions.
Certificate of calibration
Thermocouple type "J" for free mounting with shielded cable
13,00€ – 29,00€ VAT_not included
Thermocouple: J (Fe-CuNi) EN 60584-1; class 2
Temperature range: -50...400°C
Probe diameter: 5 mm
Probe length: optional
Cable length: optional
Housing material: DIN1.4571(AISI 316 Ti)
Cable type: GLGLP (glass fiber with metal shielding)
Thermocouple type "K" for free mounting with shielded cable
12,00€ – 27,00€ VAT_not included
Thermocouple: K (Ni-CrNi) EN 60584-1; class 2
Temperature range: -50...400°C
Probe diameter: 5 mm
Probe length: optional
Cable length: optional
Housing material: DIN1.4571(AISI 316 Ti)
Cable type: GLGLP (glass fiber with metal shielding)
USB / RS 485_1 isolated converter
50,00€ VAT_not included
MS USB-RS485 – 1: branches the network to 3 serial lines, connected in a star type, when powered by the RS line.
MS USB-RS485 – 2: branches the network to 2 serial lines, connected in a star type, when powered by the computer's USB.
The two converters are galvanically isolated.
USB / RS 485_2 isolated converter
50,00€ VAT_not included
MS USB-RS485 – 1: branches the network to 3 serial lines, connected in a star type, when powered by the RS line.
MS USB-RS485 – 2: branches the network to 2 serial lines, connected in a star type, when powered by the computer's USB.
The two converters are galvanically isolated.
WS01 – сензори за тегло
Сензори за платформени везни
Сензори за кранове
Сензори за автомобилни везни
Сензори за съдове
Сензори за лентови везни
Сензори за дозиращи машини
Калибриране на средства за измерване на налягане
50,00€ – 130,00€ VAT_not included
ЛК при Микросист калибрира средства за измерване на налягане, съгласно препоръките на EURAMET, които могат да бъдат разпознати и приети в цяла Европа.
При калибрирането се използват три процедури според очакваната неопределеност като % от обхвата:
Базова - 6 точки за U > 0.2% FS
Стандартна - 11 точки за